What drives the price
- Frame material. Vinyl costs least. Fiberglass, wood and clad wood cost more and tend to last longer.
- Style. Sliders and picture windows are cheapest. Casements cost more for their crank hardware, and bay or bow units cost most.
- Size. Standard sizes are cheaper. Large or odd-shaped openings add cost.
- Install method. An insert keeps the old frame. Full-frame removes it and adds labor, trim and often a permit.
- Number of windows. Trip charges and setup spread across a bigger job, so the price per window drops as the count rises.
- Glass package. Low-E coatings, gas fill and laminated or tempered glass all change the price.
- Repairs. Rot found under an old window adds work nobody can price until it's opened up.
Cost by material and style
| Window | Installed per window | Source |
|---|---|---|
| Vinyl slider | $569 to $1,002 | ProjectCostPro |
| Vinyl double-hung | $651 to $1,102 | ProjectCostPro |
| Vinyl casement | $740 to $1,252 | ProjectCostPro |
| Aluminum-clad wood | $819 to $1,452 | ProjectCostPro |
| Fiberglass double-hung | $969 to $1,552 | ProjectCostPro |
| Wood casement | $1,151 to $1,952 | ProjectCostPro |
| Vinyl, any style | $800 to $1,600 | Pella 2026 guide |
| Fiberglass or wood, any style | $1,100 to $2,200+ | Pella 2026 guide |
| Full-frame method | adds $180 to $300 | ProjectCostPro |
The calculator figures assume ten windows installed as inserts, old units hauled away, no new trim and no permit. Pella's ranges cover a wider mix of jobs. Neither is a Frisco quote.
For a quick ballpark, multiply your window count by the range for your material. Ten vinyl double-hung inserts would land somewhere around $6,500 to $11,000 on the calculator's numbers. Then expect the real quote to differ once someone measures.
Other costs to plan for
Repair instead of replace
Replacement isn't always the answer. USA Today's cost guide puts window repairs at about $200 to $700 per window, against roughly $300 to $1,500 for a typical replacement in its numbers. A sticky sash, a broken balance or worn weatherstripping can often be fixed. Repeated fogging, rot in the frame or windows that won't seal are better reasons to replace.
Patio door costs
Doors are priced separately from windows. Angi's 2026 data puts the national average for patio door replacement around $2,500, with sliding doors at $1,000 to $3,000. The patio and sliding doors page has the full table.
Frisco permit costs
The City of Frisco's permit fee schedule, effective October 1, 2026, lists window and door replacement under residential alterations. The fee is $75, plus $25 for each additional element, with a $150 cap. Ask your installer whether the permit is included in the quote.
How quotes work
After you use the form, a local pro visits, measures every opening and checks the frames. The written quote should list each window by location, the product line and glass, the install method, trim work, haul-away, permit and warranty. If a quote shows only one total, ask for the line items.
Comparing bids fairly
- Line up the same window count, sizes and styles on each bid
- Check that the glass ratings match (whole-unit U-factor and SHGC)
- Confirm the install method, since full-frame and insert are different jobs
- See who pays for rot repair if it turns up
- Read the warranty: product, glass and labor are often separate
Ways to keep the price down
- Replace in one project instead of a few windows at a time
- Keep existing sizes and styles where they work
- Use inserts where the frames are sound
- Save premium frames for the rooms where you'll notice them
Pick the materials first, then compare price. Our pages on vinyl replacement windows, fiberglass and wood windows and energy-efficient windows cover the choices.
Window replacement questions
- Why does one window cost more than ten?
Each job carries fixed costs like the trip, setup and minimum labor charge. On a one-window job all of that lands on a single unit, so the per-window price goes up.
- Is the cheapest bid usually the worst one?
Not always, but a low bid often leaves something out, such as trim, haul-away, the permit or a lesser glass package. Compare the line items before the totals.
- Do bay and bow windows cost more?
Yes. They use more material and take more labor to install, so pricing guides place them at the top of the range.
- Should I replace all my windows at once to save money?
It usually lowers the price per window. If the budget won't stretch, start with the side of the house that gets the most sun or has the worst seals.
